Montaż wydechu akropovic, MT-03
[ Pobierz całość w formacie PDF ]
Installation instructions:
*501570*
AKRAPOVIC
SLIP-ON
EXHAUST SYSTEM
for the
YAMAHA MT 03 (2007-2008)
Congratulations on purchasing an Akrapovic exhaust system. Please read these installation instructions carefully. If
you have any trouble installing the system please contact your authorized dealer!
IMPORTANT INFORMATION
Exclusion of Certain Liability
1.
The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any
other damages caused by improper installation or operation of the Akrapovic exhaust system. When installing the
Akrapovic exhaust system be careful that the exhaust system does not touch other parts sensitive to high
temperature.
2.
Akrapovic makes no representation or warranties with regard to damage caused by the improper installation, use and
maintenance of the Akrapovic exhaust system. The warranty is limited to defects recognized by our technical
department and to normal use, and excludes items subject to normal wear (gaskets and damping wool). The
guarantee is void in case of accident, modification, improper or competition use.
3.
Do not attempt to install the Akrapovic exhaust system on a motorcycle for which it was not made or tested by
Akrapovic.
4.
When the exhaust system gets very hot during operation, be careful not to burn yourself on the exhaust system or
parts which are in direct contact with it, even when the motor is not running. Also protect other people, especially
children, from the injuries mentioned above.
5.
In some cases Akrapovic exhaust system kits contain chemical products (ceramic anti-seizing grease; bolt sealant).
Handle with care, do not inhale or swallow. Avoid excessive contact with skin, eyes or mucous membranes. Keep out
of reach of children.
6.
Technical specifications of Akrapovic exhaust systems and related products subject to change without notice.
Trademarks
The Akrapovic Exhaust System Technology logo is a registered trademark of Akrapovic d.d.
Akrapovic website
Information about Akrapovic exhaust systems and related products is available on the Akrapovic website at:
Copyright
No part of the Akrapovic exhaust system or its documentation may be reproduced or distributed in any form or by any
means without the prior written authorization of the Akrapovic company.
Akrapovic, d.d. All rights reserved.
Symbols
The following symbols are used throughout these installation instructions:
INSTALLATION TIP
!
CAUTION OR WARNING
TOOLS
REQUIRED
TIGHTENING
TORQUE
USE BOLT SEALANT;
Apply 3 to 4 small drops of bolt sealant onto the cleaned and degreased threads before
tightening bolts.
WARNING! Avoid contact with skin, eyes and mucous membranes. Do not inhale fumes. Keep
out of the reach of children.
USE ANTI-SEIZING GREASE (white tube);
Prevents seizing, corrosion and excessive wear between the titanium
components of your exhaust system.
WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of
the reach of children.
USE ANTI-SEIZE LEAD-FREE COPPER PASTE (black tube);
Provides trouble-free and long-lasting protection
against seizing, corrosion and rusting of bolts, threaded ends, nuts, joints, etc. Also protects against vibration, wear
and impact.
WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of the reach of children.
NAV - 297
1
INSTALLATION INSTRUCTIONS
BEFORE INSTALLING CHECK SCHEMATIC OF THE EXHAUST SYSTEM!
IF ANY ITEMS IN THE AKRAPOVIC EXHAUST SYSTEM PACKAGE ARE MISSING PLEASE CONTACT YOUR
AUTHORIZED DEALER. KEEP THE SCHEMATIC FOR FUTURE REFERENCE.
!
THESE INSTALLATION INSTRUCTIONS MUST BE READ CAREFULLY IN ORDER TO ENSURE PROPER
INSTALLATION AND OPERATION OF THE AKRAPOVIC EXHAUST SYSTEM.
!
THE EXHAUST SYSTEM CAN BE EXTREMELY HOT. ALLOW THE MOTORCYCLE TO COOL DOWN
BEFORE BEGINNING INSTALLATION.
!
WE ADVISE YOU TO LEAVE INSTALLATION TO A QUALIFIED SERVICEMAN. IMPROPER INSTALLATION MAY
RESULT IN A SHORTER LIFETIME OF THE EXHAUST SYSTEM AND/OR DAMAGE TO THE MOTORCYCLE.
T-handle 10mm wrench
T-handle 12mm wrench
T-handle 10mm swiveling wrench
T-handle 5mm three hexagon swiveling key wrench
T-handle 5mm three hexagon key wrench
Combination 12mm wrench
Combination 13mm wrench
Spring puller
REMOVAL OF STOCK EXHAUST SYSTEM:
1.
Put the motorcycle on a side stand, we recommend a racing stand.
2.
Unlock and remove the passenger seat
(Figure 1, 2).
Figure 1
Figure 2
3.
Unscrew the bolts and remove the plastic protector between the seat and muffler
(Figure 3, 4, 5).
Figure 3
Figure 4
NAV - 297
2
Figure 5
4.
Unscrew the bolts from the anti-vibration license plate / tail light bracket
(Figure 6).
Figure 6
5.
Unscrew the bolt from the metal clamp at the muffler - link pipe joint
(Figure 7).
Unscrew the bolts from the muffler bracket
and remove the muffler
(WARNING! hold the muffler from underneath) (Figure 8, 9, 10).
Figure 7
NAV - 297
3
Figure 8
Figure 9
Figure 10
INSTALLATION OF THE AKRAPOVIC SLIP-ON STREET LEGAL EXHAUST SYSTEM
Installing the Y collector:
1.
Coat the bolt and interior of the metal clamp with Akrapovic anti-seize lead-free copper paste (black tube) and correctly
install the metal clamp onto the collector
(Figure 11).
Correctly position and install the collector onto the stock header
assembly
(Figure 12).
Hand tighten the bolt of the metal clamp.
Figure 11
Figure 12
NAV - 297
4
2.
Correctly position and reinstall stock muffler chassis hanging bracket
(Figure 13, 14)
and install additional Akrapovic metal
brackets
(Figure 15, 16, 17).
Figure 13
Figure 14
9,8Nm
7ftlb
Figure 15
Figure 16
9,8Nm
7ftlb
Figure 17
NAV - 297
5
[ Pobierz całość w formacie PDF ]